PROVISIONING AND NETWORK AUTOMATION
 

Fiber provisioning software that activates service the moment the install closes.

The install closes. The service is live. The invoice goes out. No handoffs in between.

Request a demo See how AEX works

 
Where activation stalls

Activation shouldn't be a separate job.

A technician finishes the install, someone in the office provisions the device, and someone else remembers to start billing. Each handoff adds a delay, and each delay pushes back revenue.

The answer: AEX Software's hardware-agnostic engine detects, configures, activates and rolls back devices in real time across Layer 2 and Layer 3, and ties activation straight to billing.

Orders get re-keyed

Someone in the office provisions what the tech just installed.

Billing waits

The invoice starts when someone remembers to start it.

One-vendor tools

Your provisioning only works well with one OEM.

Problems surface late

Faults show up after the truck has left.

Proof

What activation looks like with AEX

60%+faster time to invoice, as reported by customers
10OEM ecosystems, plus any TR-069 device
Same daybilling triggered by activation
How it works

From closed job to billed subscriber

1Step 1

The job closes

Connectivity is verified before the technician can close the job.

AEX FIELD SERVICE

2Step 2

The device is detected

Recognized across ten OEM ecosystems, or any TR-069 device through the AEX ACS.

AEX SOFTWARE

3Step 3

Service activates

Configured and activated in real time across Layer 2 and Layer 3, with rollback when needed.

AEX SOFTWARE

4Step 4

Billing starts

Activation triggers the first invoice the same day.

AEX SOFTWARE

What makes it different

# 01

Hardware-agnostic. Ten OEM ecosystems, including Nokia, Calix, Zhone and Ubiquiti, plus any TR-069-compatible device through the AEX ACS. You keep the hardware you already bought and your leverage with suppliers.

# 02

Activation and billing are one step. A closed job triggers zero-touch provisioning and same-day billing, so nobody has to remember to start the invoice. Customers report 60%+ faster time to invoice.

# 03

Verified before the truck leaves. Connectivity is checked at installation before the technician can close the job, so problems get caught on site, not after the subscriber calls.

What you get

Provisioning built for how operators actually grow

Each piece works alongside the vendors and hardware you already have.

OEM network equipment supported by AEX provisioning

Your hardware

Keep the hardware you already bought

Ten OEM ecosystems, including Nokia, Calix, Zhone and Ubiquiti, plus any TR-069 device. See the full list of integrations [link to add when the integrations page is live].

Technician closing a fiber install with a connectivity check

Zero-touch

Activation at the end of every install

No re-keyed orders, and issues get caught on site. Read why activation speed sets install capacity.

Service activation triggering the first invoice in AEX Software

Revenue

Provisioning and billing in one step

Customers report 60%+ faster time to invoice. See AEX billing.

From a 13-person team to a 10-state operator

“It is a neat sort of loop. AEX Software manages the product catalog, AEX Field Service handles the field activation, and then it connects back to AEX to do the provisioning and set up the billing.”

LANCE VAN DER SPUY - PRESIDENT, RIPPLE FIBER

Ripple Fiber started with no operational infrastructure. Running on AEX, it became a 10-state operator passing more than 250,000 homes.

Read the Ripple Fiber case study →

Learn How Operators Run Smarter

FAQs

What is fiber provisioning software?

Fiber provisioning software configures and activates subscriber devices on the network so service goes live without manual setup. AEX Software does this in real time across Layer 2 and Layer 3 and ties activation directly to billing.

What equipment does AEX provisioning support?

AEX supports ten OEM ecosystems, including Nokia, Calix, Zhone and Ubiquiti, plus any TR-069-compatible device through the AEX ACS.

Does AEX support zero-touch provisioning?

Yes. When a technician closes an install, the device provisions automatically and billing starts the same day, with no manual re-keying.

Can I keep my existing hardware?

Yes. The provisioning engine is hardware-agnostic, so you keep the equipment you've already bought and your leverage with suppliers.

How does provisioning connect to billing?

Activation triggers the first invoice the same day across recurring, prepaid, postpaid and wholesale billing models. Customers report 60%+ faster time to invoice.

See your path from closed job to billed subscriber.